WMF 950 S - Start-up Program Guide

24
User Manual WMF950S
Start-up | Start-up program
✻ Unpack the WMF950S and place the coffee
machine on astable, horizontal surface
✻ Observe the technical data
✻ Plug the power cord for the coffee machine into an
appropriate electrical outlet
• For commissioning, fill the water tank with
fresh drinking water.
3.3 Start-up program
Burn hazard/scalding hazard
• When dispensing beverages, hot liquid comes
out of the spouts. The adjacent surfaces and
spouts become hot.
> When dispensing beverages, do not reach
beneath the spouts.
> Do not touch the spouts immediately after
dispensing.
✻ Swich on the power switch on the back of the
coffee machine
✻ Switch on the coffee machine using the ON/OFF
switch on the left side behind the operating panel
Coffee machine switches on.
The start-up program starts.
Technical data
w page 90
NOTE
CAUTION
Follow the Safety chapter
w starting on page 7