Ignition switch
Press the ignition switch control lever to turn on the entire vehicle power, turn the control lever to the ON position,
hold the brake handle and press the start button to start the vehicle.
Name Functional description
1. Ignition
switch (on)
Press the on button and the blue light will light up.
Rotate the control lever to “ ”position, the
circuit is connected to start the vehicle.
2. Ignition
switch(off)
Rotate the control lever to“ ”. Do
not start the vehicle when the circuit is
disconnected.
3. Fuel tank
cap lock
Rotate the control lever counterclockwise to
open the fuel tank lock cap.
4. Direction
lock.
The control lever is rotated counterclockwise
by pressing down to the " " position to
lock the steering handle.
1
4
2
3
The motorcycle must be parked in a safe
place and the steering handle must be
locked to prevent the motorcycle from being
stolen.
WARNING
To Next Page
Loading...