Name Instructions for use
1.Flameout
switch.
When the switch is set to the“ “position,
the motorcycle will quickly turn off. When
the switch is set to the" "position, the
motorcycle can be started.
2.Parking light
switch
When the entire vehicle is powered on
but not started, press the switch to turn
on the headlights and position lights.
3.Emergency
switch
When the switch is pulled to the " "
position, the left and right turn signal
flash at the same time. When the switch is
pulled to the " " position, the left and
right turn signal turn off.
4.Electric start
button
If the motorcycle needs to be started by
electricity, just press the " "button.
5.Refueling
handlebar.
Control the amount of mixed gas flow.
During electric starting, the starting time shall not exceed
5s each time, and the interval shall not be less than
10s each time. If the starting cannot be successful for 3
consecutive times, the inspection shall be carried out.
3
4
1
2
5
Right combination switch
The main functions of the right combination
switch are as follows:
To Next Page
Loading...