Cleaning of air filter
After the filter element of the air filter is blocked by dust,
the resistance of the intake system will increase, the
mixture is too rich, the power will decrease and the fuel
consumption will increase. Therefore, the filter element
should be checked, cleaned and replaced regularly.
1. Remove the air cleaner element.
2. Blow the dust and dirt of the paper filter element with
compressed air or replace the paper filter element, and
clean the filter screen with neutral solution and blow dry.
1
2
1. When installing the filter element, it should be correctly
installed in a fixed position. When driving in areas with
heavy dust, the maintenance period of the filter element
should be shortened.
2. It is forbidden to use the following cleaning agents to
clean the filter screen, such as gasoline, low ignition point
solvent, acidic, alkaline and organic volatile oil.
3. When the filter element is not installed, the motorcycle
cannot be started, otherwise the piston, piston ring and
cylinder block will be excessively worn.
4. The cleaning of air filters should be carried out regularly
at our special ser vice center for maintenance and
replacement of filter elements.
To Next Page
Loading...