Driving operation
1. After starting and preheating, retract the main side
bracket, hold the brake handle, and put the motorcycle in
a braking state to prevent slipping.
2. Release the brake handle and slowly rotate the throttle
handle to accelerate; Start the motorcycle and wait for
it to run smoothly before retracting both feet onto the
pedals.
1.Please wear protective equipment (e.g. helmet,
protective gloves, protective glasses, protective clothing,
etc.) before driving. 2. When the automatic clutch is not
completely disengaged or slips, it is forbidden to drive
the motorcycle.
3. It is forbidden to increase the throttle when starting
the motorcycle.
1
2
To Next Page
Loading...