Starting and preheating
3. Press the electric start button to start the motorcycle.
4. After starting, preheat for 3 ~ 5 minutes under the
idling state. Only after the motorcycle is warmed up can
it run normally.
1. In order to prolong the service life of the motorcycle,
when driving under cold conditions, please make sure
that the user warms up for 3-5 minutes before driving,
and at the same time stop high-speed driving. During
preheating, it is forbidden to increase the throttle for
preheating.
2 . If the engine cannot start, first turn off the ignition
lock key, wait for about 1 minute, then turn on the
ignition lock key and try to start again.
3
To Next Page
Loading...