Starting and preheating
During electric starting, the starting time shall not exceed 5s each time,
and the interval shall not be less than 10s each time. If the starting
is unsuccessful for 3 consecutive times, check it. The starting and
preheating steps of the cold vehicle are as follows:
1. Turn on the ignition lock and check whether the motorcycle instrument
indicator works normally.
2. Grasp the front or rear brake handle, retract the side bracket, and turn
on the electric start control switch.
If you can't start electrically, close the ignition lock, wait
for a few seconds to protect the battery, and then restart.
Do not exceed 5S at each start. When you can't start
electrically, check the whole vehicle circuit and oil circuit.
2
1
2
To Next Page
Loading...