EasyManua.ls Logo

WMOTO RT3 S - Technical Specifications and Performance Parameters

WMOTO RT3 S
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...


Items Specifications/parameters
Outer contour dimension (length × width × height)
2165mm ×767mm ×1395mm
Wheelbase
1545mm
Minimum ground clearance
155mm
Minimum turning circle diameter
4570mm
Finished motorcycle kerb mass
194kg
Maximum capacity
150kg
Engine model
ZS1P73MM-S
Engine Type
4-Strokes, Single Cylinder, 4 Valves, DOHC
Cylinder diameter × stroke
73.0mm×59.0mm
Volume
247ml
Compression ratio
10.7:1
Electronic control unit ECU
MT05
Lubricating system
Pressure splash
Starting mode
Electric starting
Maximum net power/corresponding rotation speed
Maximum torque/corresponding speed
Minimum no-load stable speed
Fuel consumption under operating conditions
3.56L/100km (measured according to GB15744-2019)
Maximum speed
109km/h
Fuel tank capacity and fuel model
Type and capacity of lubricating oil
Crankcase 10W/40, full capacity 1.3L, maintenance exchange capacity 1.1L;
Gearbox 80W-90, full capacity 150ml, maintenance exchange capacity 120mL
Tyre size/Air Pressure
Front 120/70-15M/C/200kPa, Rear140/60-14M/C/250kP
Technical specifications and performance parameters