Inspection of wheels
Tyre size and air pressure
Outer tire wear limit value
Yaw limit value of wheel
Tire size
Front wheel
120/70-15
Rear wheel
140/60-14
Tyre pressure
Front wheel
200(kPa)
Rear wheel
250(kPa)
Outer tire
wear limit
value
Front
wheel
Twi scale mark
Rear wheel Twi scale mark
Yaw limit value of
wheel
Axial direction 2.0mm
Radial direction 2.0mm
1. If the tire pressure is too high, the riding comfort will be
reduced and the wear of various parts will be accelerated. If the
tire pressure is too low, the rolling resistance of the tire will get
increased and the fuel consumption will be increased. In serious
cases, part delamination of the tire will result in tire burst.
2. If the inner tube valve core leaks, repair or replace the valve
core. Repair or replace the tube when it leaks.
3. Regularly check and adjust the wheels at our special service
center.
To Next Page
Loading...