Operation
Operation
Operation doc050624 4-2
4
See Figure 4-1.
STARTING THE PLANER
IMPORTANT! Read and understand all information and warnings con-
tained in the Safety section of this Operators Manual before starting
the planer.
Check for rotation of all cutter heads before closing the lid and starting the machine. Each
cutter head should move freely and not impact any fences before starting.
Check that all tools used in the setup of the machine are removed from the machine
before starting any of the motors.
The lid must be securely fastened down before the MP280 can be operated.
The Emergency Stop Button must be pulled out to allow motors to be started.
FIG. 4-1
Power On
Indicator
Feed Motor
On/Off
Power On/Off
Lower cutter
On
Fixed side
cutter On/Off
Movable side
cutter On/Off
Upper cutter
On/Off
Emergency Stop
Sawdust
extract
On/Off
To Next Page
Loading...
