Wood-mizer MP280 - 5.12 Long-Term Storage

Maintenance
Long-term storage
Maintenance doc050624 5-18
5
5.12 Long-term storage
If the machine is not used for a long period of time, do as follows:
 Disconnect the power cord.
 Perform all routine actions described above.
 Remove the knives with mounting strips or clamping wedges and store them well
lubricated in above zero temperature.
 Loosen the motor belt tension.
 Spray a thin layer of anti-rust coating (such as P.D.R.P) onto the places not
protected against rusting.
 Store the machine in a well ventilated room.
 Cover the planer/moulder.