Maintenance
Electrical lockout procedures (US Market only)
Maintenance doc050624 5-24
5
3. Verify that the controls are in neutral.
4. Remove the lockout devices and re-energize the machine or equipment.
NOTE: The removal of some forms of blocking may require re-energi-
zation of the machine before safe removal.
5. Notify affected personnel that the servicing or maintenance is completed and the machine
or equipment is ready for use.
PROCEDURE INVOLVING MORE THAN ONE PERSON
In the preceding steps, if more than one individual is required to lock out the equipment,
each shall place his own personal lock on the energy isolating devices.
To Next Page
Loading...
