Worcester DT10RF User Manual

Setting the clock and time
1. Press the set? button until SET and CLOCK are
displayed.
2. Press OK.
3. Press + to switch between 24hr and 12hr display.
4. Press set? to set the clock and the hours display
flashes.
5. Press + or - to set the correct hour.
NOTE: Speed up the display by holding down
the + or - buttons.
6. Press the set? button to accept the correct hour
and minutes display flashes.
7. P r e s s + o r - t o s e t t h e c o r r e c t m i n u t e s .
8. Press the set? button to accept the correct
minutes. Now SET and DATE will be displayed.
NOTE: If the day displayed is incorrect the date
needs resetting. To change the date, refer to
SETTING THE DATE on the next page.
If you do not wish to change the date, press
set? to return to the normal display.
DT10RF OPTIMISING PROGRAMMER
INSTRUCTION MANUAL
8 716 115 494a (02.2009)
OPERATING & INSTALLATION
INSTRUCTIONS
23
DT10RF RECEIVER
PROGRAMMABLE SETTINGS
8_716_115_494a 9/2/09 09:49 Page 25

Worcester DT10RF Specifications

General

Compatibility	Worcester Bosch Boilers
Display	LCD
Programming	7-day programmable
Mounting	Wall-mounted
Wireless	Yes
RF Frequency	868 MHz
Accuracy	±0.5°C
Type	Digital
Power Source	Battery
Communication	Radio Frequency