OPERATING & INSTALLATION
INSTRUCTIONS
DT10RF OPTIMISING PROGRAMMER
INSTRUCTION MANUAL
8 716 115 494a (02.2009)
24
Setting the date
NOTE: If the day displayed is incorrect, the date
needs resetting as follows:
1. Press the set? button until SET and DATE are
displayed.
2. Press the OK button once, the year will flash on
the display.
3. Press + or - to correct the year.
4. Press the set? button and the month will flash on
the display.
5. Press + or - to correct the month.
6. Press the set? button and the day will flash on
the display.
7. P r e s s + o r - t o c o r r e c t t h e d a y.
8. Press the set? button, the DLS and ON will flash
on the display.
9. Press + or - to set for ON or OFF
10. Press set? twice to return to the normal display.
NOTE: DLS = Day Light Saving time
DT10RF RECEIVER
PROGRAMMABLE SETTINGS
To Next Page
Loading...
