AFTER SALES SUPPORT:
Telephone: 1800 269 981
E-mail: support@eurocentra.com.au
AFTER SALES SUPPORT:
Telephone: 1800 269 981
E-mail: support@eurocentra.com.au
26 27
• Press the +/= button – the sum of both volumes will appear in the
lower section of the display;
• Repeat the above mentioned steps, in order to continue adding the
measured volumes.
Temperature display
Keep the FT/M button pressed for approx. 2 seconds – the tem-
perature appears in the lower section of the display. If the Anglo-
Saxon system is set (ft./in), the temperature will be displayed in °F
(Fahrenheit), if the metric system is set (m), the temperature will be
displayed in °C
Press the READ button again in order to switch to return to the
measurement mode.
Battery display
Empty battery: Here, the symbol constantly appears in the display
in order to remind you to change the battery.
Switching off the device
Keep the
button pressed down until the device switches off.
After approx. 60 without entry, the device will switch off automatically.
OperationOperation
To Next Page
Loading...
Need help?
General
