AFTER SALES SUPPORT:
Telephone: 1800 269 981
E-mail: support@eurocentra.com.au
AFTER SALES SUPPORT:
Telephone: 1800 269 981
E-mail: support@eurocentra.com.au
04 05
Introduction
We congratulate you on your new ultrasound distance measurer
and are convinced that you will be satisfied with this state-of-the-art
device. The device conforms to the relevant safety regulations.
In order to guarantee that this device will always function and
perform and in order to ensure your personal safety, please read
through these instructions before using the device and, above all,
follow the safety advice! All activities carried out on and with this
device are only permitted to be carried out to the extent that they
have been described in these operating instructions.
If you should pass this ultrasound distance measurer on, please
include these instructions.
Packaging
Packaging is for protection from transport damage. Packaging
consists of raw materials that can be reused or returned to the raw
materials circuit.
Remove all parts from the packaging before operating the device.
Proper use
The electronic multi-measurement device GT-UDM-02 deter-
mines the distance of an object through electronically generated
high-speed signals. The measurement result can be read off of the
display. The device has a computer chip and a key indicator and
memory function, can be used for automatic area calculation and
volume counting and is an ideal device for the construction and fur-
nishing industry (e.g. property brokers, furniture designers and crafts-
men, etc.).
The device has a laser orientation function, i.e. it emits a red laser
beam with which it can easily aim at an object during use. The
automatic temperature comparison of the device provides a more
precise measurement result and indicates the exact environmental
temperature at the same time.
To Next Page
Loading...
Need help?
General
