EasyManuals Logo

Workzone GT-UDM-02 User Manual

Workzone GT-UDM-02
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
AFTER SALES SUPPORT:
Telephone: 1800 269 981
E-mail: support@eurocentra.com.au
AFTER SALES SUPPORT:
Telephone: 1800 269 981
E-mail: support@eurocentra.com.au
06 07
The electronic multi-measurement device GT-UDM-02 is a class II laser
device and conforms with international safety guidelines 21CFR
1040.10, 1040.11 and EN 60825-1:2007
Do not remove the labels from the device.
Warning!
When using battery-operated devices, basic safety measures must
be followed, including the following guidelines, for protection from
risk of fire and damage to persons or property.
Read these instructions thoroughly before using the device.
Keep these instructions.
Keep your work area in order!
Disorder in work areas leads to risk of accident.
CAUTION
Laser radiation
Do not stare
into the beam
EN 60825-1:2007
Max. power
1 mW at 650 nm
Class 2 laser product
Safety advice Safety advice
Take environmental influences into consideration!
Do not expose the device to rain. Do not use the device in a damp
or wet environment. Ensure that your work area is well lit. Do not
use the device in locations where there is a risk of fire or explosion,
e.g. near flammable liquids or gases.
Keep children away!
This device is not intended for use by persons (including children)
with impaired physical, sensory or mental capabilities or lack of
experienced and/or lack of knowledge, unless they are supervised by
a person responsible for their safety or have received instructions
from this person on how to use the device.
Children must be supervised in order to ensure that they do not
play with the device.
Keep the packaging material out of the reach of children. Suffocation
hazard if swallowed.
Ensure that you are standing securely!
Ensure that you are standing securely, in order to maintain balance
in every working position.
Always pay attention!
Concentrate on your work. Proceed sensibly. Do not use the device
if you are tired.
Do not look into the laser beam.
Do not shine the laser beam directly into the eyes of other people.
Do not set up the device at eye level and do not use on or near reflective
surfaces, as the laser beam could be projected into your eyes or the

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Workzone GT-UDM-02 and is the answer not in the manual?

Workzone GT-UDM-02 Specifications

General IconGeneral
BrandWorkzone
ModelGT-UDM-02
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals