1414
20V Cordless Brushless Circular saw EN
lubrication or maintenance. There are no user
serviceable parts in your power tool. Never use water or
chemical cleaners to clean your power tool. Wipe clean
with a dry cloth. Always store your power tool in a dry
place. Keep the motor ventilation slots clean. Keep all
working controls free of dust.
Periodically clear dust and chips from guard and base to
ensure proper performance.
FOR BATTERY TOOLS
The ambient temperature range for the use and storage
of tool and battery is 0
°C-45°C.
The recommended ambient temperature range for the
charging system during charging is 0
°C-40°C.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
TROUBLE SHOOTING
Symptom Possible Causes Possible Solution
Tool will not start when
operating the on/off switch.
Battery pack not plugged in.
Battery pack is powered off.
Check to make sure battery pack is
connected well into a working outlet.
Charging the battery.
Cutting depth is less than that
is set.
Sawdust accumulated at the rear
of the base.
Shake out sawdust. Consider connecting a
vacuum for dust collection.
Blade spins or slips
Blade is not tightly engaged with
the spindle.
Remove the blade, and reassemble it as
described in Saw Blade Assembly and
Removing section.
Blade will not cut a straight line.
Blade is dull.
Blade is not mounted properly.
Saw is not being guided properly.
Mount a new, sharp blade on the saw.
Check that blade is properly mounted.
Use a parallel guide.
Blade kicks back when
beginning a cut
Blade is not spinning fast enough
Allow the saw blade to reach full speed
prior to beginning a cut in the material.
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description Battery-powered circular saw
Type Designation WX520 WX520.X (5 - designation
of machinery, representative of circular saw)
Function Cutting various materials with a rotating
toothed blade
Complies with the following Directives:
2006/42/EC, 2014/30/EU, 2011/65/EU&(EU)2015/863
Standards conform to
EN 62841-1, EN 62841-2-5, EN 55014-1, EN 55014-2
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
2020/07/23
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
To Next Page
Loading...
