Worx WX550 Manual

20V Li-Ion multi-purpose saw EN
13
TROUBLESHOOTING
Symptom
Possible
Causes
Possible
Solution
The tool
suddenly
stops during
operation.
Over load
Battery
temperature
too high
Low battery
capacity
Relieve the
load on the
machine
immediately
and allow
cooling for
approx. 30
seconds by
running the
machine on
no-load.
Charge the
battery pack.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product,
Description WORX Li-ion Multi-Purpose Saw
Type WX550 WX550.1 WX550.4 WX550.5
WX550.9 (5-designation of machinery, represen
-
tative of Saw)
Function Sawing various materials
Complies with the following Directives,
2006/42/EC
2014/30/EU
2011/65/EU
Standards conform to
EN 62841-1
EN 62841-2-11
EN 55014-1
EN 55014-2
The person authorized to compile the technical file,
Name Marcel Filz
Address POSITEC Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
2019/07/15
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd.
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China

Worx WX550 Specifications

General

Product color	Black, Orange
Built-in light	-
Adjustable speed	Yes
Number of blades	1
Included saw blade type	Metal saw blade
Number of batteries included	1 pc(s)
Idle stroke rate (max)	3000 spm
Idle stroke rate (min)	0 spm
Input power	- W
Power source	Battery
Charging time	60 min
Battery voltage	20 V
Battery capacity	2 Ah
Battery level indicator	No

Weight and Dimensions

Depth	165 mm
Width	257 mm
Height	127 mm
Weight	1900 g