XENO XDR4 range - Page 54

53 | Chapter 1 : DVR User Manual
<Event Record setting>
In the case that the Type is set to “C+M” (Continuous + Motion), “C+S” (Continuous + Sensor), or “C+M+S” (Continuous +
Motion + Sensor), both Continuous and Event Record settings are simultaneously engaged.
If there is no event (Motion, Sensor, Alarm), the DVR records continuously with the Continuous Record settings. If there is an
event (Motion, Sensor, Alarm), the DVR records with the Event Record Settings.
If you want to disable a specific camera from recording, select the “NONE” option for the Type.
<Resolution setup>
Select the record resolution for each camera channel.
Users can select the record resolution for each camera channel. The record resolution is applied to both Continuous and
Event (Sensor, Alarm, Motion) record settings.