4-18 DocuTech 128/155/180 HighLight Color Operator Guide
Problem Solving
Figure 4-17 Area 18
Points to note for clearing jams in area 18:
• Sometimes the controller messages direct you to discard the
last sheet delivered to the stack following a jam in area 18.
Check for this message when clearing an area 18 paper jam.
• If your printer has frequent jams in this area, you may need to
clean the Q1107 sensor.
• If your printer has a bypass transport module, you should
check for paper jams in areas 19 and 20 after clearing an area
18 paper jam.
Clearing a paper jam in the bypass transport
NOTE: High volume printer configuration only
1. Open the bypass transport module door.
2. Press the area 19 green lever in the direction of the arrow
printed on it.
To Next Page
Loading...
