DocuTech 128/155/180 HighLight Color Operator Guide 5-13
Technical information
*Although the diagonal meets the 18-inch (457 mm) rotation limit,
the paper stock long dimension exceeds the processor path width.
The sheet must stay in the short-edge feed orientation throughout
the paper path.
NOTE: Non-United States customers: The part numbers in this
table are for the United States only. Contact your local
representative for common sizes used in Europe, Japan, Canada,
etc.
Table 5-9. Other paper sizes that can be rotated
For media sizes that are not listed in the above tables, view the
graph shown in figure 5-1. The graph can be used to determine
which sizes of media can and cannot be rotated within the Bypass
Transport.
10.5 x 14.5 267 x 368 17.90 NO* 2-up of US 7.25 X
10.5 in.
(Executive)
US Ledger/
US B-Size
11.0 x 17.0 279 x 432 20.25 NO 2-up of US 8.5 x
11.0 in. (Letter)
Common
size name
Inches x
inches
Millimeter
equivalent
Diagonal in inches
Can be
rotated
Comment
(similar to or the
same as)
Common
size name
Inches x
inches
Millimeter
equivalent
Diagonal in inches
Can be
rotated
Comment
(similar to or the
same as)
Largest
square
12.73 x 12.73 323 x 323 18.00 YES
Largest
rectangle
10.89 x 14.33 277 x 364 18.00 YES Length is
constrained by
paper path width.
To Next Page
Loading...
