FreeFlow Scanner 665E Operator Manual
1-6
1. Overview
SCSI Cable
A 9.8 foot (3 m) SCSI cable is provided with your Xerox Scanner.
This cable enables communication between the scanner and the
host PC.
Power Cord
Plug the power cord into the scanner at the left rear panel.
The scanner requires a 10 amp 115 VAC connection in the United
States or Canada, and a 5 amp 240 VAC connection in Europe.
Contact an electrician if your electrical service does not match
these requirements.
SCSI cable
Power cord
To Next Page
Loading...
