Xerox AltaLink B8045 Installation And Configuration Guide

3
Installation
This section provides instructions for installing and configuring the Smart Card solution.
There are four main installation procedures to follow in sequence:
• Hardware Installation: Unpack the Smart Card Enablement kit, then install the card reader device.
• Enabling the Smart Card: To enable the Smart Card for configuration, use the Feature Enable Key.
• Configuring the Smart Card: Enable the Smart Card function, then customize the settings.
• Using Smart Card: For instructions on how to use the card reader to access the device functions,
refer to Using Smart Card, in this guide.
3-1Xerox
®
AltaLink
®
Series
Smart Card Installation and Configuration Guide

Xerox AltaLink B8045 Specifications

General

Print Speed	Up to 45 ppm
Monthly Duty Cycle	Up to 200, 000 pages
Automatic Duplexing	Yes
Control Panel	10.1-inch color touchscreen
Functions	Print, Copy, Scan, Fax
Memory	4 GB
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	Ethernet, USB, Wi-Fi
Scanner Type	Duplex Automatic Document Feeder
Copy Speed	Up to 45 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print
Print Resolution	1200 x 1200 dpi
Hard Drive	320 GB (optional)