Xerox AltaLink B8045 Installation And Configuration Guide

Configuring the Smart Card
After the Smart Card feature is enabled on the device, you can use Internet Services to configure the
Smart Card.
Configure Smart Card Authentication
To enable and configure the Smart Card:
1. In the Internet Services Login/Permissions/Accounting menu, click Login Methods.
2. Enter the Domain Controller details for the authentication server.
a. Click Domain Controllers – Edit from the Configuration Settings list.
Note
Initially the Domain Controllers are empty and the NTP server is not set.
b. Click Add Domain Controller.
c. Select the Windows Based Domain Controller check box. Or, to select the Linux-Based Domain
Controller, clear the check box.
Xerox
®
AltaLink
®
Series3-10
Smart Card Installation and Configuration Guide
Installation

Xerox AltaLink B8045 Specifications

General

Print Speed	Up to 45 ppm
Monthly Duty Cycle	Up to 200, 000 pages
Automatic Duplexing	Yes
Control Panel	10.1-inch color touchscreen
Functions	Print, Copy, Scan, Fax
Memory	4 GB
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	Ethernet, USB, Wi-Fi
Scanner Type	Duplex Automatic Document Feeder
Copy Speed	Up to 45 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print
Print Resolution	1200 x 1200 dpi
Hard Drive	320 GB (optional)