Xerox AltaLink B8045 Installation And Configuration Guide

Software Configuration
Enter the Smart Card Enablement Key
Before you configure the Smart Card solution, use Internet Services to enable the Smart Card feature
on your Xerox
®
device. The Feature Enablement Key is printed on the inside cover of the Enablement
guide provided within the Smart Card kit.
To enable the device software:
1. Access Internet Services.
a. Open the Web browser from your Workstation.
b. In the URL field, enter http:// followed by the IP Address of the device. For example: If the IP
Address is 192.168.100.100, enter the following into the URL field: http://192.168.100.100.
c. Press Enter to view the Home page.
2. Access Properties.
a. Click the Properties tab.
b. If prompted, enter the Administrator User ID and Password. The default is admin and 1111.
c. Click the Login button.
3. Enable the Smart Card software.
a. Click the Properties link.
b. Click the Login/Permissions/Accounting link.
c. Click the Login Methods link.
3-7Xerox
®
AltaLink
®
Series
Smart Card Installation and Configuration Guide
Installation

Xerox AltaLink B8045 Specifications

General

Print Speed	Up to 45 ppm
Monthly Duty Cycle	Up to 200, 000 pages
Automatic Duplexing	Yes
Control Panel	10.1-inch color touchscreen
Functions	Print, Copy, Scan, Fax
Memory	4 GB
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	Ethernet, USB, Wi-Fi
Scanner Type	Duplex Automatic Document Feeder
Copy Speed	Up to 45 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print
Print Resolution	1200 x 1200 dpi
Hard Drive	320 GB (optional)