Xerox AltaLink B8045 Installation And Configuration Guide

Hardware Installation
Connect the USB Smart Card Reader to the MFD
To install the card reader:
1. Unpack the Smart Card Enablement Kit. The kit contains the following items.
• Smart Card Enablement Guide
• Four Velcro Dual-Lock Fastener pads
• Three Cable Ties
• One Ferrite Bead
Ensure that you have read the license agreement and agree to the terms and conditions specified
before installation.
2. Locate the card reader device to install.
• There are four types of card reader available, one upright model, or three slimline models.
• Locate the device to install and ensure it is configured.
Xerox
®
AltaLink
®
Series3-2
Smart Card Installation and Configuration Guide
Installation

Xerox AltaLink B8045 Specifications

General

Brand	Xerox
Model	AltaLink B8045
Category	All in One Printer
Language	English