b. Click Add New.
c. Enter the required Domain or Realm.
d. Select either the IP Address or the Host Name and enter the server details. For most installations,
the Alternate Authentication server is the same as the Smart Card Domain Controller.
e. Click Save.
f. Click Close.
Configure a Security Certificate
If you require the MFD to be configured for certificate validation, complete this section. The following
instructions are included:
• Create a Device Certificate
• Import a Certificate Authority Certificate
• Install a Domain Controller Certificate
If certificate validation is not required, refer to Configure Smart Card Inactivity Timer.
3-15Xerox
®
AltaLink
®
Series
Smart Card Installation and Configuration Guide
Installation
To Next Page
Loading...
Need help?
General
