1. Standard output tray
2. Multipurpose feeder
3. Trays
4. Duplex unit
5. Rear door
PPaappeerr JJaamm iinn tthhee SSttaannddaarrdd OOuuttppuutt TTrraayy
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
PPaappeerr JJaamm iinn tthhee MMuullttiippuurrppoossee FFeeeeddeerr
1. Remove paper from the multipurpose feeder.
2. Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3. Close the multipurpose feeder.
4. Open the front door.
Warning: To prevent damage from electrostatic discharge,
touch any exposed metal frame of the printer before
accessing or touching interior areas of the printer.
5. Remove the imaging unit.
Warning: Do not expose the imaging unit to direct light for
more than 10 minutes. Extended exposure to light may cause
print quality problems.
Warning: Do not touch the photoconductor drum. Doing so
may affect the quality of future print jobs.
5
To Next Page
Loading...
