6. Remove the jammed paper.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
Note: Make sure that all paper fragments are removed.
7. Insert the imaging unit.
8. Close the door.
9. Open the multipurpose feeder.
10. Flex, fan, and align the paper edges before loading.
11. Reload paper.
PPaappeerr JJaamm iinn TTrraayyss
1. Remove the tray.
2. Open the front door.
Warning: To prevent damage from electrostatic discharge,
touch any exposed metal frame of the printer before
accessing or touching interior areas of the printer.
6
To Next Page
Loading...
