10. Remove the optional tray.
11. Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
12. Insert the tray.
PPaappeerr JJaamm iinn tthhee DDuupplleexx UUnniitt
1. Open the front door.
Warning: To prevent damage from electrostatic discharge,
touch any exposed metal frame of the printer before
accessing or touching interior areas of the printer.
2. Remove the imaging unit.
Warning: Do not expose the imaging unit to direct light for
more than 10 minutes. Extended exposure to light may cause
print quality problems.
Warning: Do not touch the photoconductor drum. Doing so
may affect the quality of future print jobs.
8
To Next Page
Loading...
