3. Remove the jammed paper.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
Note: Make sure that all paper fragments are removed.
4. Insert the imaging unit.
5. Close the door.
6. Remove the tray.
7. Push the duplex unit latch to open the duplex unit.
8. Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
9. Close the duplex unit.
10. Insert the tray.
PPaappeerr JJaamm iinn tthhee RReeaarr DDoooorr
1. Open the front door.
Warning: To prevent damage from electrostatic discharge,
touch any exposed metal frame of the printer before
accessing or touching interior areas of the printer.
9
To Next Page
Loading...
