Properties
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide 169
Protocol Settings Unicode Support – Allows you to specify whether to enable
Unicode support in the host name and workgroup name
during SMB transmission.
Auto Master Mode – Allows you to enable or disable (on/off)
Auto Master Mode.
Encrypt Password – Allows you to enable or disable
password encryption during SMB transmission.
NetWare
Allows you to configure the settings for NDS, transport
protocol and SLP, as follows.
Host Name – Enter the host name.
Active Mode – Selects the Active Mode for the printer when
using NetWare.
• Bindery:PServer Mode: Select this when using the printer
server mode in bindery service.
• Directory:PServer Mode: Select this when using the
printer server mode in directory service.
File Server Name – Enter the file server name.
Polling Interval – Allows you to set the time interval from
when print data enter the print queue until printing starts.
Number of searches – Enter the maximum number of
searches.
Password – Enter the print server (PServer) password.
Re-enter Password – Allows you to verify the PServer
password by re-entering the same password.
TBCP Filter – This is only displayed when PostScript is
enabled.
NDS – Configure the NDS settings.
Tree Name – Enter the tree name.
Context Name – Enter the context name of the Print Server
Object. Up to 511 characters can be entered, with the
exception of + (plus sign), \ (backslash), and ~ (tilde).
Transport Protocol (IPX/SPX) – Configure the IPX/SPX
settings.
Frame Type – Select the frame type.
• Auto: Automatically configures the active frame type.
• Ethernet II: Selects Ethernet frame type.
• Ethernet 802.3: Selects IEEE802.3 frame type.
• Ethernet 802.2: Selects IEEE802.3/IEEE802.2 frame
type.
• Ethernet SNAP: Selects IEEE802.3/IEEE802.2/SNAP
frame type.
Network Address – Displays the network address in the
XXXXXXXX:XXXXXXXXXXXX format.
SLP – SLP will only be displayed when NetWare is selected
in Port Status and TCP/IP is selected as the Transport
Protocol.
Active Discovery – Allows you to enable or disable the
automatic detection of the SLP directory agent.
Feature Setting items
To Next Page
Loading...
Need help?
General
