Xerox D125 User Manual

049-905
Cause: The HCS detects paper at the HCS top tray, HCS bypass, or at the HCS stacker
tray. However, no paper is present; HCS sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-907
Cause: The HCS detects paper at the HCS top tray, HCS bypass, or at the HCS stacker
tray. However, no paper is present; HCS sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-908
Cause: The HCS detects paper at the HCS top tray, HCS bypass, or at the HCS stacker
tray. However, no paper is present; HCS sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-940
Cause: HCS front door fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-941
Cause: Stacker Cart fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-945
Cause: HCS detects Top Tray as always full
User Guide20-22
High Capacity Stacker (HCS)

Xerox D125 Specifications

General

Print Speed	Up to 125 ppm
Print Resolution	2400 x 2400 dpi
Standard Paper Capacity	4, 050 sheets
Maximum Paper Capacity	8, 050 sheets
Connectivity	Ethernet, USB
Duplex Printing	Standard