Xerox D125 User Manual

If enabled by your System Administrator, the Paper Tray Properties screen may be
displayed on the UI.
5. Select OK to save the information and close the Tray Properties window.
Finishing Transport
Finishing Transport main components
The Finishing Transport is comprised of the following components:
FunctionComponentNo.
The Finishing Transport serves as an interface to
transfer paper from the Finisher Module and the
attached third-party output device.
Finishing Transport1
This display indicates the status of the Finishing
Transport and shows the locations of any paper jams.
Finishing Transport status display2
Open to clear paper jams and clean the paper path
areas.
Finishing Transport front door3
User Guide24-6
Standard Finisher Plus

Xerox D125 Specifications

General

Print Speed	Up to 125 ppm
Print Resolution	2400 x 2400 dpi
Standard Paper Capacity	4, 050 sheets
Maximum Paper Capacity	8, 050 sheets
Connectivity	Ethernet, USB
Duplex Printing	Standard