Perfect binding is a process in which the leaves (pages) are bound by using an adhesive
and trimming off the excess edges. The adhesive holds the interior sheets of the book
together. Front and back covers may be included if desired. The final output is a finished,
perfect bound book with a wrap-around cover.
The Perfect Binder can be used in three modes:
• Manual mode: Load the preprinted book block into the Perfect Binder compiler tray
and covers into Tray 9. Program the Perfect Binder settings using the copier/printer
UI and press Start to complete the job.
• Copy mode: Copy the book block and cover. Program the Perfect Binder settings using
the copier/printer UI and press Start to complete the job.
• Print mode: From the user’s computer, the book block and cover are programmed
using the print driver. Information and steps for submitting the job are available
through the print driver help screens.
User Guide21-2
Perfect Binder (D110/D125/D136 with integrated controller)
To Next Page
Loading...
Need help?
General
