Xerox D125 - Page 321

053-315, 053-316
Cause: Software problem
Remedy: Power off/on the system.If fault continues, contact the Customer Support
Center.
053-326
Cause: Software problem
Remedy: Recheck the thickness of the incoming job; resend job. If fault continues,
contact the Customer Support Center.
053-327, 053-328
Cause: Internal component failure
Remedy: Power off/on the system.If fault continues, contact the Customer Support
Center.
053-332
Cause: Software problem
Remedy: Power off/on the system.If fault continues, contact the Customer Support
Center.
053-333, 053-334
Cause: Internal component failure
Remedy: Power off/on the system.If fault continues, contact the Customer Support
Center.
053-335
Cause: Software problem
Remedy: Power off/on the system.If fault continues, contact the Customer Support
Center.
053-400
Cause: Book stacker tray is open
Remedy: Close the tray.If fault continues, power on/off the system.If fault continues,
contact the Customer Support Center.
053-401
Cause: Top cover is open
Remedy: Close the cover.If fault continues, power on/off the system.If fault continues,
contact the Customer Support Center.
053-404
Cause: Adhesive filling tray is open
Remedy: Close the tray.If fault continues, power on/off the system.If fault continues,
contact the Customer Support Center.
21-29Xerox
®
D95/D110/D125/D136 Copier/Printer
User Guide
Perfect Binder (D110/D125/D136 with integrated controller)