TWAIN Scanning Guide Image Enhancements
42 User’s Guide
Fill Margin Holes
Select this option if you are scanning pages with punched holes in the margins. This option will fill
these holes with the detected background color in the final scan. The scanner will detect and fill
the holes under the following conditions:
Note: This option is available in the interface only if the connected scanner supports this feature.
• The size of the hole can be between approximately 5 mm and 7 mm
• The maximum width of the margin is 25.4 mm from the edge of the paper
• The size of the margin is 24.4 mm
• The position of the hole cannot be flush to the edge of the margin area and it cannot overlap
the edge of the margin area
Color Processing Panel Options
The options in this panel are for setting how the scanner should process colors in specific color
modes.
To Next Page
Loading...
Need help?
General