Xerox DocuMate 3640

Xerox
®
DocuMate
®
3640
User’s Guide
191
8
Scanning from ISIS
You can use the ISIS interface from QuickScan or any other application that will access the ISIS driver.
Note that the ISIS interface for each application varies depending on the application. Please refer to
that software application’s User Guide for instructions on scanning the ISIS interface.
Open the QuickScan software to access the ISIS driver scanning options. Please note that you may see
the following warning message:
1. Please disregard the message and click Continue.
The ISIS drivers were installed correctly during the installation of your scanner.
The Scanner Selection dialog box will then appear.
2. Select Xerox® DocuMate® 3640 from the list of scanners and click OK.
Your scanner is then ready to work with the ISIS driver.