Xerox DocuMate 3640

Xerox
®
DocuMate
®
3640
User’s Guide
33
Installing the Scanner Driver
The scanner driver installation will start first.
1. The Welcome screen for the scanner driver Setup Wizard opens. Click Next.
2. On the Xerox License Agreement window, read the license agreement. If you accept the terms,
select I Agree then click Next.
If you choose not to accept the license agreement, click Cancel. Click Close on the Installation
Interrupted window.
3. The software will now be installed.
4. Stop when you see the “Complete the installation by connecting your hardware” window. Do not
click OK yet. Leave the window open and proceed to the next section.
Note: If you do not see this on-screen diagram for connecting the scanner, stop and follow the
instructions below.