Xerox
®
DocuMate
®
4799 Welcome
2-2 User Guide
•Microsoft
®
Windows
®
operating system:
– 32-bit or 64-bit Windows 7 (Service Pack 1)
– 32-bit or 64-bit Windows 8 / 8.1
– 32-bit or 64-bit Windows 10
• Minimum of 2 gigabyte (GB) of internal memory (RAM)
• Minimum available hard disk space:
– 350 MB for the scanner driver
– 1 GB for Visioneer OneTouch
– 1 to 2 GB for each additional application
A VGA or SVGA Monitor:
• The recommended settings for your monitor are:
– Color quality of 16-bit or 32-bit
– Resolution set to at least 800 x 600 pixels
Refer to your Windows documentation for instructions on setting the color quality and resolution
for the monitor.
Documentation
The following printed documentation is provided in the box:
• Installation guide—abbreviated scanner setup and installation instructions.
• Technical support card—contact information for technical support and customer service,
and a brief overview of our standard product warranty.
The following soft-copy documentation is available on the installation disc:
• Scanner user guide—instructions for scanner setup, installation, operation, maintenance,
safety, and warranty
• OneTouch scanning guide—instructions for configuring and scanning using OneTouch
• TWAIN scanning guide—instructions for accessing and scanning using the TWAIN interface
• Control sheets—automatically adjust the scan settings when scanning using the TWAIN
interface. The file contains layouts for various ISO and U.S. paper sizes. The TWAIN scanning
guide contains instructions on using these sheets while scanning.
Make sure you print the page size that matches the size of the pages in your document stack.
Also, make sure the application you are using is not set to automatically scale the page to fit
on the paper in your printer.
• File separation sheets—automatically separate a stack of paper into two or more separate
files, when scanning using the TWAIN interface.
• Patch code sheets—use with an application that supports detection of patch code data
when using the TWAIN interface. The patch code page layouts have been specifically
designed for your scanner. The file contains Patch 2, 3 and T layouts for A4 and U.S. Letter size
pages.