Xerox DocuMate 4799 - Select the Paper Path; Scanning from the Automatic Document Feeder (ADF); Preparing Documents for Scanning

Xerox
®
DocuMate
®
4799 Loading Documents to Scan
5-4 User Guide
Select the Paper Path
Scanned documents can be exited to the output tray in the front of the scanner or to the straight
path tray in the back of the scanner. The paper path is automatically switched when the straight
path is opened or closed.
Note: follow these guidelines when using the straight path tray.
• Use the straight path tray when you have set the paper thickness level to thick and
documents being scanned are from 0.2 to 0.6 mm (7.9–23.6 mils).
• Make sure there is enough space in the back of the scanner for the paper to exit.
Scanning from the Automatic Document Feeder (ADF)
Preparing Documents for Scanning
• Fan the documents to make sure all pages in the stack are separated.
• Bend and then flatten the document stack to make sure the horizontal edges are aligned to
help prevent paper from skewing while being pulled through the scanner.
• Pinch the ends to align the leading edges slantwise to help prevent multiple pages from being
fed through at a single time.