Xerox Phaser 3150 - Using a Postscript Driver for Macintosh

Using a PostScript Driver
11
English
Using a PostScript Driver for
Macintosh
Installing a PPD for a PostScript Driver
The CD-ROM that came with your printer provides you with the
PPD file to use the PostScript driver, Apple LaserWriter driver, for
printing on a Macintosh computer.
Verify the following before you install the printer software:
1 Turn on your computer and printer.
2 Insert the CD-ROM that came with your printer into the
computer’s CD-ROM drive.
3 Double-click the P3150 on your Macintosh desktop.
4 Double-click the Installer folder.
5 Double-click the Installer icon depending on your system
OS version.
•
Xerox Phaser 3150 Classic : Mac OS 8.6 - 9.2
•
Xerox Phaser 3150 OSX : Mac 10.1 - 10.3
6 Click Continue .
7 Click Install .
8 After the installation is finished, click Quit .
Item Requirements
Operating system Mac OS 8.6 - 9.2/10.1 - 10.3
RAM Mac OS 8.6 - 9.2 64 MB
Mac OS 10.1 - 10.3 128 MB
Free disk space 200 MB
wzUGGwGXXGGmSGqGX]SGYWW[GGXa\ZGwt