64 Using ESC/P Emulation
Switching Print Languages
The printer supports multiple emulation modes and can switch between multiple
print languages.
There are three methods of switching print languages.
Switching Languages by Commands
If the printer receives a command that explicitly tells which language to use, the
printer switches to that language.
Switching Languages Automatically
The printer examines data received by its host interface and automatically
determines and switches to the appropriate language.
Switching Languages by Interface
The printer can be programmed to switch to a particular language for a particular
host interface. This can be done by setting a language for each interface on the
control panel.
Mode Menu Screen
The menu items for the emulation modes can be accessed from the mode menus.
To access the mode menu for the ESC/P emulation mode, press the <Menu>
button and select [Print Language] > [ESC/P]. The following is the first screen of the
ESC/P mode menu.
Reference: For information about the setting items of the ESC/P mode menu, refer to "7
Setting the ESC/P Mode" (P. 69).
To Next Page
Loading...
Need help?
General