Maintenance
Phaser 6140 Color Laser Printer
User Guide
113
Cleaning the Interior
After clearing paper jams or replacing one of the toner cartridges, inspect the inside of the printer
before closing the printer covers.
Remove any remaining pieces of paper. For more information, see Clearing Paper Jams on page 147.
Remove any dust or stains with a dry, clean cloth.
Warning: Never touch a labeled area found on or near the heat roller in the fuser. You can get
burned. If a sheet of paper is wrapped around the heat roller, do not try to remove it by yourself to
avoid injuries or burns. Switch off the printer immediately and wait 40 minutes for the fuser to cool.
1. Fuser
2. Transfer belt unit
6140-022
1
2
To Next Page
Loading...
