Troubleshooting
Phaser 6140 Color Laser Printer
User Guide
148
3. Carefully remove any jammed paper in the printer. Confirm that there are no scraps of paper left
inside.
Caution: Prolonged exposure to light may damage the imaging unit so do not leave the cover open
for more than 5 minutes at a time.
4. Close the front cover.
5. Remove the tray from the printer and then carefully pull out any jammed paper remaining inside
the printer.
6. Reinsert the tray into the printer.
Caution: Do not use excessive force on the tray; doing so could damage the tray or the inside of
the printer.
Clearing Jams at the Manual Feed Slot
1. Pull Tray 1 out of the printer.
2. Remove any jammed or damaged paper in the tray and then close the tray.
3. Press the front cover button to open the cover.
4. Carefully remove any jammed paper in the printer. Make sure there are no torn pieces of paper
inside the printer.
6140-035
6140-036
To Next Page
Loading...
Need help?
General