Installation and Setup
Phaser 6140 Color Laser Printer
User Guide
33
Connecting via USB
To use USB, PC users must have Windows 2000/XP/Server 2003 or newer. Macintosh users must use
Mac OS X, version 10.3 and higher.
To connect the printer to the computer via USB cable:
1. Make sure the printer is turned off.
2. Connect one end of a standard A/B USB 2.0 cable to the printer’s USB port.
3. Attach the power cord and then plug in the printer and turn it on. For safety information, see Power
Cord on page 10.
4. Connect the other end of the USB cable to the computer’s USB port.
5. When the Windows Found New Hardware Wizard appears, cancel it.
6. You are ready to install the printer drivers. Go to Installing the Printer Drivers on page 38.
To Next Page
Loading...
Need help?
General