Maintenance
Phaser 6140 Color Laser Printer
User Guide
120
#SetMsgAddr service@xerox.com
• When the full access password is “admin”, and to set the recipient e-mail address to
“service@xerox.com”, then confirm the setting result on the network settings list:
#Password admin
#SetMsgAddr service@xerox.com
#NetworkInfo
Note: Describe the #SetMsgAddr command before the #NetworkInfo command. If they are
written in reverse, the information retrieved by the #NetworkInfo command and the result of
executing the #SetMsgAddr command may differ.
To Next Page
Loading...
