Printing
Phaser 6140 Color Laser Printer
User Guide
61
7. Slide the width and length guides until they rest lightly against the edge of the print media stack.
Note: Be careful not to bend the paper.
Note: When Size Mismatch (in the PCL driver’s Advanced tab, or in the PostScript driver’s Details
section in the Advanced tab) is set to Use Printer Settings, you must set the paper type and size
for the tray you intend to use on the printer control panel in advance.
8. Insert the tray back into the printer until it stops.
Caution: Be careful not to use excessive force on the tray. Doing so could damage the printer.
See also:
Setting Paper Types and Sizes on page 62
6140-010
To Next Page
Loading...
