EasyManuals Logo

Xerox Phaser 8560 User Guide

Xerox Phaser 8560
159 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #146 background imageLoading...
Page #146 background image
Phaser® 8560/8860 Printer
A-2
If you notice unusual noises or odors:
1. Turn off the printer immediately.
2. Disconnect the power cord from the electrical outlet.
3. Call an authorized service representative to correct the problem.
The power cord is attached to the printer as a plug-in device at the back of the printer. If it is
necessary to disconnect all electrical power from the printer, disconnect the power cord from
the electrical outlet.
Warning: Do not remove the covers or guards that are fastened with screws unless you are
installing optional equipment and are specifically instructed to do so. Power should be OFF
when performing these installations. Disconnect the power cord when removing covers and
guards for installing optional equipment. Except for user-installable options, there are no parts
that you can maintain or service behind these covers.
Note: Leave the printer on for optimum performance; it does not pose a safety hazard.
The following are hazards to your safety:
The power cord is damaged or frayed.
Liquid is spilled into the printer.
The printer is exposed to water.
If any of these conditions occur, do the following:
1. Turn off the printer immediately.
2. Disconnect the power cord from the electrical outlet.
3. Call an authorized service representative.
Maintenance Safety
Do not attempt any maintenance procedure that is not specifically described in the
documentation supplied with your printer.
Do not use aerosol cleaners. The use of supplies that are not approved may cause poor
performance and could create a hazardous condition.
Do not burn any consumables or routine maintenance items. For information on Xerox
supplies recycling programs, go to www.xerox.com/gwa
.

Table of Contents

Other manuals for Xerox Phaser 8560

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 8560 and is the answer not in the manual?

Xerox Phaser 8560 Specifications

General IconGeneral
ColorYes
Duplex printingNo
Print technologyLaser
Maximum resolution2400 x 600 DPI
Time to first page (color, normal)5 s
Print speed (black, normal quality, A4/US Letter)3 ppm
Print speed (color, normal quality, A4/US Letter)30 ppm
Maximum internal memory1 MB
Sound power level (standby)33 dB
Sound pressure level (printing)54 dB
Maximum duty cycle85000 pages per month
Number of print cartridges4
Page description languagesPCL 5c
Maximum input capacity625 sheets
Paper tray 2 input capacity525 sheets
Multi-Purpose tray input capacity100 sheets
Power requirements110 - 240 V, 50/60 Hz
Networking features10/100BaseTX
Standard media sizes140 x 216 mm - 216 x 356 mm
Power consumption (active)230 W
Compatible operating systemsLinux, Mac OS X 10.2 +, Novell NetWare 3.x +, Windows 2000 +
Envelopes sizesC5, DL
Maximum print size216 x 356 mm
Paper tray media typesBond paper, Envelopes, Glossy paper, Labels, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizesExecutive (184 x 267mm), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Supported network protocols (IPv4)IPv6
Sustainability certificatesENERGY STAR
Power consumption (PowerSave)43 W
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)10 - 32 °C
Storage relative humidity (H-H)10 - 95 %
Operating relative humidity (H-H)10 - 80 %
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)406 x 533.4 x 368 mm

Related product manuals